Atlas - 53459 - Locomotive, Diesel, EMD GP38 - Genesee & Wyoming - 51

Model Information: The Atlas GP38 is made in China and has always been made in China. These mechanisms run fine but the first releases (1996) do not support drop in decoders. Both versions use a dual-flywheel, split frame chassis with a 5-Pole skew-wound motor.

DCC Information: Early Chinese versions are DCC-friendly requiring a complicated split-board DCC install. Later versions are DCC-Ready accepting a 1 Amp N Scale Mobile Decoder for Atlas N-Scale GP40-2, U25B, SD35, Trainmaster, B23-7 and others (DN163A0) from digitrax.com. Unfortunately, the only way to tell which kind you have is to remove the shell and check the chassis. If it has two small lightboards, you have an old one in your hand. A single long lightboard indicates a DCC-Ready chassis.
As of the 2001 run, this model was also offered with factory-installed DCC decoder, first Lenz LE063XF and then (circa 2010s) a NCE decoder.
Since the 2018 run, it is only offered with ESU Loksound sound decoder without DCC no-sound option. So if you want a DCC no-sound, you'll need to install a decoder by yourself.

Prototype History: The EMD GP38 is a 4-axle diesel-electric locomotive built by General Motors Electro-Motive Division between January 1966 and December 1971. The locomotive's power was provided by an EMD 645 16-cylinder engine which generated 2,000 horsepower (1.49 MW). The company built 706 GP38s for North American railroads. In 1972, it was replaced by an updated model, the GP38-2.

From Wikipedia

Road Name History: Known today as the largest of the shortline holding companies, Genesee & Wyoming began as a shortline by that name in 1899 with a 15 mile line between Retsof and Caledonia, New York, just south of Rochester. In 1982, they extended southward to Greigsville by buying a former Lackawanna line from Conrail. In 1985, another purchase extended their reach north to Rochester and southwest to Silver Springs. This brought the mileage up to about 90. The Wyoming in the name is a reference to the Wyoming Valley.

In 1977, the railroad set up Genesee & Wyoming Inc. as a parent company. In 1985, they began to buy other shortlines and launch new ones as various Class One routes came up for sale or lease. Each of these lines operates under their own names but share the orange, yellow and black GNWR paint scheme, variations of which have been used by GNWR for decades. The logos of these related lines also use the GNWR style but with different wording and the occasional personalized element.

As of this writing, the Genesee & Wyoming family includes 121 shortline and regional railroads spread across North America, Europe and Australia. As of 2019, G&W became a subsidiary of Brookfield Infrastructure Partners. G&W has also bought other shortline groups, notably Rail Link in 1996, Summit View (the Ohio Central System) in 2008, Rail Management in 2005,.CAGY Industries in 2008, and largest of all RailAmerica in 2012.

Ironically, the Genesee & Wyoming Railroad was merged into the Rochester & Southern in 2003. The GNWR exists as a paper railroad but the logos on the diesels patrolling the old GNWR now say Rochester & Southern or the neighboring Buffalo & Pittsburgh.

Brand/Importer Information: In 1924 Stephan Schaffan, Sr. founded the Atlas Tool Company in Newark, New Jersey. In 1933 his son, Stephan Schaffan, Jr., came to work for his father at the age of sixteen. Steve Jr. built model airplanes as a hobby and frequented a local hobby shop. Being an enterprising young man, he would often ask the owner if there was anything he could do to earn some extra spending money. Tired of listening to his requests, the hobby-store owner threw some model railroad track parts his way and said, "Here, see if you can improve on this".

In those days, railroad modelers had to assemble and build everything from scratch. Steve Jr. created a "switch kit" which sold so well, that the entire family worked on them in the basement at night, while doing business as usual in the machine shop during the day.

Subsequently, Steve Jr. engineered the stapling of rail to fiber track, along with inventing the first practical rail joiner and pre-assembled turnouts and flexible track. All of these products, and more, helped to popularize model railroading and assisted in the creation of a mass-market hobby. The budding entrepreneur quickly outgrew the limitations of a basement and small garage operation. Realizing they could actually make a living selling track and related products, Steve and his father had the first factory built in Hillside, New Jersey at 413 Florence Avenue in 1947. On September 30, 1949, the Atlas Tool Company was officially incorporated as a New Jersey company.

In 1985, Steve was honored posthumously for his inventions by the Model Railroad Industry Association and was inducted into the Model Railroad Industry Hall of Fame in Baltimore, Maryland. In addition, Steve was nominated and entered into the National Model Railroad Association Pioneers of Model Railroading in 1995.

In the early 1990s, the Atlas Tool Company changed its name to Atlas Model Railroad Company, Inc.