Atlas - 52209 - Locomotive, Diesel, EMD MP15 - Genesee & Wyoming - 45

Model Information: This model was introduced in 2005. It is designed in the USA and produced in China like almost all of Atlas' recent products.

The detail is very nice and the performance is quiet and smooth (except at low speeds, where you may hear a slight buzzing). Like all similar Atlas models, it uses blackened, low-profile wheels and "golden white" LED's. This engine can likely pull 20 cars or more on a flat surface.

DCC Information: It is a new-enough design to be fully DCC-Ready, and supports a simple drop-in decoder. The Digitrax DN163A3 is an example of such a decoder.

Prototype History: The EMD MP15DC is a 1,500 hp (1,100 kW) switcher-type diesel locomotive model produced by General Motors' Electro-Motive Division between March 1974 and January 1983. 351 examples were built.
A MP15AC variant, with an AC drive, was also offered. Between August 1975 and August 1984 246 MP15ACs were built, including 25 for export to Mexico, and four built in Canada. The MP15DC replaced the SW1500 in EMD's catalog, and is superficially very similar to the predecessor model, using the same engine (a V12 EMD 645-series powerplant) in a similar design of hood and bodywork. The primary difference is the MP15's standard Blomberg B trucks.
The third version, EMD MP15T, was essentially a variant of the MP15AC in that it featured a turbocharged prime mover, which was meant to be more fuel efficient (it was also slightly longer than the MP15AC) using only an eight-cylinder version of EMD's 645E prime mover (the other two models featured 12-cylinder 645s). Only 43 were built, all but one being manufactured for the Seaboard System.

From Wikipedia (MP15DC) and (MP15AC)
Read more on American-Rails.com

Full EMD MP15 data sheet on The Diesel Shop.

Road Name History: Known today as the largest of the shortline holding companies, Genesee & Wyoming began as a shortline by that name in 1899 with a 15 mile line between Retsof and Caledonia, New York, just south of Rochester. In 1982, they extended southward to Greigsville by buying a former Lackawanna line from Conrail. In 1985, another purchase extended their reach north to Rochester and southwest to Silver Springs. This brought the mileage up to about 90. The Wyoming in the name is a reference to the Wyoming Valley.

In 1977, the railroad set up Genesee & Wyoming Inc. as a parent company. In 1985, they began to buy other shortlines and launch new ones as various Class One routes came up for sale or lease. Each of these lines operates under their own names but share the orange, yellow and black GNWR paint scheme, variations of which have been used by GNWR for decades. The logos of these related lines also use the GNWR style but with different wording and the occasional personalized element.

As of this writing, the Genesee & Wyoming family includes 121 shortline and regional railroads spread across North America, Europe and Australia. As of 2019, G&W became a subsidiary of Brookfield Infrastructure Partners. G&W has also bought other shortline groups, notably Rail Link in 1996, Summit View (the Ohio Central System) in 2008, Rail Management in 2005,.CAGY Industries in 2008, and largest of all RailAmerica in 2012.

Ironically, the Genesee & Wyoming Railroad was merged into the Rochester & Southern in 2003. The GNWR exists as a paper railroad but the logos on the diesels patrolling the old GNWR now say Rochester & Southern or the neighboring Buffalo & Pittsburgh.

Brand/Importer Information: In 1924 Stephan Schaffan, Sr. founded the Atlas Tool Company in Newark, New Jersey. In 1933 his son, Stephan Schaffan, Jr., came to work for his father at the age of sixteen. Steve Jr. built model airplanes as a hobby and frequented a local hobby shop. Being an enterprising young man, he would often ask the owner if there was anything he could do to earn some extra spending money. Tired of listening to his requests, the hobby-store owner threw some model railroad track parts his way and said, "Here, see if you can improve on this".

In those days, railroad modelers had to assemble and build everything from scratch. Steve Jr. created a "switch kit" which sold so well, that the entire family worked on them in the basement at night, while doing business as usual in the machine shop during the day.

Subsequently, Steve Jr. engineered the stapling of rail to fiber track, along with inventing the first practical rail joiner and pre-assembled turnouts and flexible track. All of these products, and more, helped to popularize model railroading and assisted in the creation of a mass-market hobby. The budding entrepreneur quickly outgrew the limitations of a basement and small garage operation. Realizing they could actually make a living selling track and related products, Steve and his father had the first factory built in Hillside, New Jersey at 413 Florence Avenue in 1947. On September 30, 1949, the Atlas Tool Company was officially incorporated as a New Jersey company.

In 1985, Steve was honored posthumously for his inventions by the Model Railroad Industry Association and was inducted into the Model Railroad Industry Hall of Fame in Baltimore, Maryland. In addition, Steve was nominated and entered into the National Model Railroad Association Pioneers of Model Railroading in 1995.

In the early 1990s, the Atlas Tool Company changed its name to Atlas Model Railroad Company, Inc.