Prototype History: An intermodal container is a large standardized shipping container, designed and built for intermodal freight transport, meaning these containers can be used across different modes of transport – from ship to rail to truck – without unloading and reloading their cargo. Intermodal containers are primarily used to store and transport materials and products efficiently and securely in the global containerized intermodal freight transport system, but smaller numbers are in regional use as well. These containers are known under a number of names, such as simply container, cargo or freight container, ISO container, shipping, sea or ocean container, container van or (Conex) box, sea or c can.
The 48-foot (14.63 m) shipping container is a High Cube container in that it is 9 ft 6 in (2.90 m) tall on the exterior. It is 8 ft 6 in (2.59 m) wide which makes it 6 inches (15 cm) wider than ISO-standard containers. This size was introduced by container shipping company APL in 1986, and is used domestically in North America on road and rail, and may be transported on deck by ship. This size being 8 feet (2.44 m) longer and 6 inches (15 cm) wider has 29% more volume capacity than the standard 40-ft High Cube, yet the cost to move it by truck or rail are almost the same.
From Wikipedia
The 48-foot (14.63 m) shipping container is a High Cube container in that it is 9 ft 6 in (2.90 m) tall on the exterior. It is 8 ft 6 in (2.59 m) wide which makes it 6 inches (15 cm) wider than ISO-standard containers. This size was introduced by container shipping company APL in 1986, and is used domestically in North America on road and rail, and may be transported on deck by ship. This size being 8 feet (2.44 m) longer and 6 inches (15 cm) wider has 29% more volume capacity than the standard 40-ft High Cube, yet the cost to move it by truck or rail are almost the same.
From Wikipedia
Road Name History: The NTRAK organization was founded in 1973. Its mission is to provide a set of specifications for N Scale modular layouts.
NTRAK modules are designed to bring model railroading to the public at conventions, exhibits, and shopping malls. In the past a person wanting to see model trains in operation had to seek out a club or home layout that was open to the public. These layouts were often designed for the convenience of the owners and operators, and not for public viewing. The modular layouts have the flexibility to be fitted into many different size and shape areas. They offer close up viewing and maximum train action. Long trains passing each other are always attention getters and are a feature of the NTRAK layouts. While designed for large public display layouts, the NTRAK modules are being used for home layouts and for club layouts as well. For the modeler, the NTRAK modules offer a number of advantages over a fixed layout. We are such a mobile society and the modules make it very easy to move a layout from one home to the next without destroying all the work that went into it. Our smaller homes, apartments, and mobile homes all lend themselves to N scale layouts. Persons who want to run longer trains have the opportunity to take a module to one of the many NTRAK meets during the year and to be part of a large layout. There they can run their longer trains and meet other N scale modelers.
NTRAK modules are designed to bring model railroading to the public at conventions, exhibits, and shopping malls. In the past a person wanting to see model trains in operation had to seek out a club or home layout that was open to the public. These layouts were often designed for the convenience of the owners and operators, and not for public viewing. The modular layouts have the flexibility to be fitted into many different size and shape areas. They offer close up viewing and maximum train action. Long trains passing each other are always attention getters and are a feature of the NTRAK layouts. While designed for large public display layouts, the NTRAK modules are being used for home layouts and for club layouts as well. For the modeler, the NTRAK modules offer a number of advantages over a fixed layout. We are such a mobile society and the modules make it very easy to move a layout from one home to the next without destroying all the work that went into it. Our smaller homes, apartments, and mobile homes all lend themselves to N scale layouts. Persons who want to run longer trains have the opportunity to take a module to one of the many NTRAK meets during the year and to be part of a large layout. There they can run their longer trains and meet other N scale modelers.
Brand/Importer Information: DeLuxe Innovations is a "wholesale manufacturer" of model trains. We manufacture scale replica train models and sell them to hobby shops and distributors worldwide. 2013 marked the 20 year anniversary of DeLuxe Innovations brand trains. There are over 25 body styles in our product line and all of the cars in our single and multi-car packs have different road numbers. DeLuxe Innovations, Inc. is owned by Dave Ferrari, founder of Squeak N Products. We are located in Midland Park, New Jersey. When Dave purchased the business it was located in Burbank, California which would have been a bit of a long commute so the move to the East Coast was planned. Our first East Coast location was in Whippany, NJ along the Whippany River.
The business was started in 1993 by George Johnsen and Roberta Liebreich in Burbank, California. They had a philosophy that just wouldn't allow using a coal car as a "stand in" for a woodchip car, or printing any and all boxcar paint schemes on a PS-1. Starting with the release of the first ever etched metal parts for a ready to run car (1994's Twinstack's metal walkways) through the full dimension underframe and etched metal roofwalk (1996's 1944 AAR Boxcar) to the challenging RoadRailer system (2000), our products have been accurate to target the modeler or enthusiast.
You can also follow DeLuxe on Twitter
The business was started in 1993 by George Johnsen and Roberta Liebreich in Burbank, California. They had a philosophy that just wouldn't allow using a coal car as a "stand in" for a woodchip car, or printing any and all boxcar paint schemes on a PS-1. Starting with the release of the first ever etched metal parts for a ready to run car (1994's Twinstack's metal walkways) through the full dimension underframe and etched metal roofwalk (1996's 1944 AAR Boxcar) to the challenging RoadRailer system (2000), our products have been accurate to target the modeler or enthusiast.
You can also follow DeLuxe on Twitter
Item created by: CNW400 on 2022-03-07 09:01:32
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.