Atlas - 50 005 574 - Boxcar, 50 Foot, FMC, 5077 - Atlanta & St. Andrews Bay - 7090

Model Information: This model was introduced in 2016. It is part of Atlas' "Master" line of N Scale products. These Atlas N scale Plate B Boxcars feature early and late body styles with single sliding doors, body mounted couplers, and X-Panel roofs.

Prototype History: In the 1970's with the growth of the Per Diem business model, FMC produced a series of 50 foot box cars in different configurations. The single-sliding-door configuration is one of the best known and used widely by many different railroads. These cars were produced using the Gunderson metal works which FMC had acquired in 1965. In late 1975, FMC began producing a 5,077-cubic-foot Plate B box car for IPD and Railbox service. FMC's 5077s have seven panels to either side of the 10-foot door, an X-panel roof, and non-terminating ends that are slightly different from those used on FMC's earlier cars. Note how the sidesill is notched all the way back to the bolsters, a key feature of FMC's mature design.

The main difference between the 5077 cu. ft cars built by FMC vs the 5277-5347 cu. ft cars built by the same manufacturers is the overall height of the car, the smaller 5077 cars were Plate B while the larger 5277-5347 cars were Plate C. Over 4,300 cars were produced from 1975-1979 by FMC's Portland, Oregon plant. The cars were delivered in numerous colorful shortline paint schemes, as well as the nationwide car pool fleet of Railbox. Many secondhand cars were later seen in Class 1 railroads and large leasing company fleets under additional shortline reporting marks.

Road Name History: The Atlanta & St. Andrews Bay was completed in 1908 between Panama City, Florida (on the Bay) and Dothan, Alabama 89 miles to the north. At first, they made their way hauling forest products but saw a place for themselves in making Panama City into a major port. United Fruit Company agreed, bought the railroad and made plans to make Panama City their primary port for bananas. A&StAB picked up "The Bay Line" nickname during this period. In 1931, United Fruit gave up on these plans and sold the A&StAB to International Paper. In 1994, they officially changed their name to “Bay Line Railroad" and their reporting marks changed from ASAB to BAYL. In 2005, the Bay Line was sold to the Genesee & Wyoming shortline group. In recent years, the BAYL has been extended on the Dothan end east to Hilton, Georgia (where they connect with G&W sister roads Hilton & Albany and Chattahoochee Industrial Railroad) and north to Grimes and Abbeville, Alabama. This was the original Abbeville Southern Railway but it had been part of Atlantic Coast Line for decades. The segment between Dothan and Grimes is over CSX trackage rights.

The Atlanta and St. Andrews Bay Railroad (reporting mark ASAB), also known as the Bay Line, was a Class I railroad which operated in Alabama and Florida. The company was founded in 1906 and opened its mainline between Dothan, Alabama and Panama City, Florida in 1908. Later reclassified as a short-line railroad, its assets were acquired by the Bay Line Railroad in 1994.

As with many railroads in the region, the A&SAB began in the minds of timber investors and land developers seeking to access the agricultural resources of the Florida Panhandle and South Alabama. Chief among them was A. B. Steele, who created the railroad to build south out of Dothan towards the Gulf Coast. The company incorporated on February 14, 1906 and opened its 82-mile (132 km) line between Dothan and Panama City on July 15, 1908. Panama City was incorporated the following year at the terminus of the line. Plans were soon made to extend the railroad north to Atlanta, however financial difficulties and pressure from the Central of Georgia railroad put an end to any plans for extension. Read more on Wikipedia.

Brand/Importer Information: In 1924 Stephan Schaffan, Sr. founded the Atlas Tool Company in Newark, New Jersey. In 1933 his son, Stephan Schaffan, Jr., came to work for his father at the age of sixteen. Steve Jr. built model airplanes as a hobby and frequented a local hobby shop. Being an enterprising young man, he would often ask the owner if there was anything he could do to earn some extra spending money. Tired of listening to his requests, the hobby-store owner threw some model railroad track parts his way and said, "Here, see if you can improve on this".

In those days, railroad modelers had to assemble and build everything from scratch. Steve Jr. created a "switch kit" which sold so well, that the entire family worked on them in the basement at night, while doing business as usual in the machine shop during the day.

Subsequently, Steve Jr. engineered the stapling of rail to fiber track, along with inventing the first practical rail joiner and pre-assembled turnouts and flexible track. All of these products, and more, helped to popularize model railroading and assisted in the creation of a mass-market hobby. The budding entrepreneur quickly outgrew the limitations of a basement and small garage operation. Realizing they could actually make a living selling track and related products, Steve and his father had the first factory built in Hillside, New Jersey at 413 Florence Avenue in 1947. On September 30, 1949, the Atlas Tool Company was officially incorporated as a New Jersey company.

In 1985, Steve was honored posthumously for his inventions by the Model Railroad Industry Association and was inducted into the Model Railroad Industry Hall of Fame in Baltimore, Maryland. In addition, Steve was nominated and entered into the National Model Railroad Association Pioneers of Model Railroading in 1995.

In the early 1990s, the Atlas Tool Company changed its name to Atlas Model Railroad Company, Inc.