Specific Item Information: Shell only. A complete version was also available with stock number 2018C for the price of $114.95
Model Information: Life-Like introduced the SW9/1200 model in 1997. In 2003, they added the SW8/600/900 which is a very similar model which uses the same mechanism. It is fairly high quality and runs well when it can get good pickup. It is prone to stalling, however, whenever it has slightly dirty wheels, encounters slightly dirty track or runs over a turnout. For this reason, they are best run in pairs or at high speeds. That being said, the revised versions run better and the most recent releases that started in 2017 run quite well.
The reason for the stalling is due to the fact that it is simply a small, lightweight engine. Even though the chassis is all-metal and split-frame with a free-floating weight inside the cab, it just doesn't weigh all that much. Without enough heft, it is hard to keep conductivity with the track. The motor is s 5-pole skew-wound job. All eight wheels provide pickup and drive. Directional lighting is provided by an LED-equipped PC board mounted to the front of the chassis. The model uses chemically blackened wheels. Early runs used body-mounted Rapido couplers. Later versions feature Accumate or MTL couplers. The couplers are held in place with a plastic clip to permit easy swapping with the couplers of your choice.
Walthers also supplies the mechanisms for the latest 2017 DCC-Ready version to Micro-Trains which uses its own shell for their switchers.
The reason for the stalling is due to the fact that it is simply a small, lightweight engine. Even though the chassis is all-metal and split-frame with a free-floating weight inside the cab, it just doesn't weigh all that much. Without enough heft, it is hard to keep conductivity with the track. The motor is s 5-pole skew-wound job. All eight wheels provide pickup and drive. Directional lighting is provided by an LED-equipped PC board mounted to the front of the chassis. The model uses chemically blackened wheels. Early runs used body-mounted Rapido couplers. Later versions feature Accumate or MTL couplers. The couplers are held in place with a plastic clip to permit easy swapping with the couplers of your choice.
Walthers also supplies the mechanisms for the latest 2017 DCC-Ready version to Micro-Trains which uses its own shell for their switchers.
DCC Information: There is no specific support for DCC on these models, but installing a decoder in the cab is a usual solution.
A wired DCC decoder installation for this model can be found on the following:
- Brad Myers' N-scale DCC decoder installs blog.
- André Kritzinger's Chessie System in N scale website.
A wired DCC decoder installation for this model can be found on the following:
- Brad Myers' N-scale DCC decoder installs blog.
- André Kritzinger's Chessie System in N scale website.
Prototype History: An EMD SW8 is a diesel shunting/switching locomotive manufactured by General Motors Electro-Motive Division and General Motors Diesel between September 1950 and February 1954. Power is supplied by an EMD 567B 8-cylinder engine, for a total of 800 hp (600 kW). It proved to be a very popular light switcher which was used by many roads. A total of 309 of this model were built for United States railroads and 65 for Canadian railroads. Starting in October 1953 a number of SW8s were built with either the 567BC or 567C engine.
The EMD SW600 is a diesel switcher locomotive built by General Motors Electro-Motive Division between February 1954 and January 1962. Power was provided by an EMD 567C 6-cylinder engine, which generated 600 horsepower (450 kW).
An EMD SW900 is a diesel switcher locomotive built by General Motors Electro-Motive Division and General Motors Diesel (GMD) between December 1953 and March 1969. Power was provided by an EMD 567C 8-cylinder engine that generated 900 horsepower (670 kW). Built concurrently with SW1200, the eight-cylinder units had a single exhaust stack.
The SW9 is externally the same as an SW1200, and the SW8 is externally the same as an SW900 or an SW600. The only physical differences between the two actual models (SW8 and SW9) are the exhaust stacks (with the SW9 having two and the SW8 having one).
Read more on Wikipedia: SW8, SW600, SW900
The EMD SW600 is a diesel switcher locomotive built by General Motors Electro-Motive Division between February 1954 and January 1962. Power was provided by an EMD 567C 6-cylinder engine, which generated 600 horsepower (450 kW).
An EMD SW900 is a diesel switcher locomotive built by General Motors Electro-Motive Division and General Motors Diesel (GMD) between December 1953 and March 1969. Power was provided by an EMD 567C 8-cylinder engine that generated 900 horsepower (670 kW). Built concurrently with SW1200, the eight-cylinder units had a single exhaust stack.
The SW9 is externally the same as an SW1200, and the SW8 is externally the same as an SW900 or an SW600. The only physical differences between the two actual models (SW8 and SW9) are the exhaust stacks (with the SW9 having two and the SW8 having one).
Read more on Wikipedia: SW8, SW600, SW900
Road Name History: The Miller Brewing Company is an American beer brewing company headquartered in Milwaukee, Wisconsin. The company has brewing facilities in Albany, Georgia; Chippewa Falls, Wisconsin; Fort Worth, Texas; Irwindale, California; Milwaukee, Wisconsin; and Trenton, Ohio. On July 1, 2008, SABMiller formed MillerCoors, a joint venture with rival Molson Coors to consolidate the production and distribution of its products in the United States, with each parent company's corporate operations and international operations to remain separate and independent of the joint venture.
The joint venture ended after the SABMiller operation was acquired by Anheuser-Busch InBev (AB InBev) on October 10, 2016. The new company is called Anheuser-Busch InBev SA/NV (AB InBev). On October 11, 2016, the company sold the Miller brand portfolio outside the US and Puerto Rico to Molson Coors, which also retained "the rights to all of the brands currently in the MillerCoors portfolio for the U.S. and Puerto Rico".
Molson Coors is the sole owner of Miller Brewing Company and plans to keep the MillerCoors name and the Chicago headquarters and to operate the company in much the same manner as before October 11, 2016.
The joint venture ended after the SABMiller operation was acquired by Anheuser-Busch InBev (AB InBev) on October 10, 2016. The new company is called Anheuser-Busch InBev SA/NV (AB InBev). On October 11, 2016, the company sold the Miller brand portfolio outside the US and Puerto Rico to Molson Coors, which also retained "the rights to all of the brands currently in the MillerCoors portfolio for the U.S. and Puerto Rico".
Molson Coors is the sole owner of Miller Brewing Company and plans to keep the MillerCoors name and the Chicago headquarters and to operate the company in much the same manner as before October 11, 2016.
Brand/Importer Information: The Freight Yard was a hobby shop that did custom decoration and special runs of other manufacturers' N Scale products. It sold its custom products under several brands or collections: Premiere Editions, by The Freight Yard and Dreams Design.
It was located in Anaheim, California and then moved to 2006 in Phoenix, Arizona.
Established in the late 1980s, it stopped business under this name by the end of the 2000s.
The Freight Yard was owned and operated by Darren J. Cohen. Darren is now operating North Valley Trains.
The Freight Yard / Premiere Editions runs are usually available in series of two to twelve different numbers (suffixed A to M, with I not used).
The first two digits of the stock number correspond to the release year (9x being 199x, and 2x being 200x).
It was located in Anaheim, California and then moved to 2006 in Phoenix, Arizona.
Established in the late 1980s, it stopped business under this name by the end of the 2000s.
The Freight Yard was owned and operated by Darren J. Cohen. Darren is now operating North Valley Trains.
The Freight Yard / Premiere Editions runs are usually available in series of two to twelve different numbers (suffixed A to M, with I not used).
The first two digits of the stock number correspond to the release year (9x being 199x, and 2x being 200x).
Item created by: CNW400 on 2019-11-04 17:35:27. Last edited by Alain LM on 2022-06-16 04:30:07
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.